D/C-1 Catamaran, “Sebago”

SEBAGOD/C-1

Catamaran, "Sebago"

50' x 30' x 5 Tons

4-Ft. Dia. Shewmon

Force 9-10 Conditions

File D/C-1, obtained from Walter Greene, Yarmouth, ME. - Vessel name Sebago, ocean racing catamaran, designed by Walter Greene, LOA 50' x Beam 30' x Draft 7' (2' boards up) x 5 Tons - Drogue: 4-ft. diameter Shewmon (sea anchor) on 250' x 3/4" nylon braid tether, with bridle arms of 50' each and 1/2" galvanized swivel - Deployed in a whole gale in 100 fathoms in the English Channel with winds of 40-50 knots and seas of 20-30 ft. - Vessel's stern yawed 10° .

 

This is the second file obtained from Walter Greene (see also S/C-5). The same 4-ft. diameter Shewmon sea anchor was used on the same boat, Sebago, only this time in drogue fashion, off the stern. Her stern stayed fairly snubbed into the seas, yawing no more than 10° off to each side. (The bows yawed in excess of 45° in file S/C-5). This deployment took place in 100 fathoms of water in the English Channel. Conditions were atrocious - 40-50 knot winds and average seas of 20 ft. with much bigger waves now and then. The 160 sq. ft. wingmast on Sebago was a complicating factor. In an article appearing in the August/September 1988 issue of Multihulls Magazine, Greene was interviewed by Jack Petith about living with a wing mast in storms and provided the following opinions and observations (reproduced by permission):

The wing mast being in the center of the boat, does funny things with your center of effort.... Sailing to France we were, altogether, five days with no sail on the boat.... Sometimes we were hove-to and going backwards.... One time we put the sea anchor out for two days [off the stern]; but the sea anchor really beat the hell out of the boat - deck gear and waves crashing on the boat. I can see it working with a traditional mast. In fact, I don't think you could capsize a reasonable sized multihull with one.